AI&P TACTICAL, LLC
CUSTOM TACTICAL SHOTGUNS
72 E Chauvez Rd
Scottville, Michigan 49454
Tel: 231-690-0954 Fax 231-480-0360
E-mail: aippi@netscape.com
J.D. McGuire, Owner
This slug gun is upgrade with police quality parts and will give you positive feed. The finish is parkerized to give you an edge when in the harsh winter weather. With the right optics and ammo this one will fill your tag out to 150 yards and then some.
Built from all new factory parts and acessories. 870 Magnum receiver, we engrave AI&P under the ejection port then blast it down and parkerize it black. polymer trigger housing with heavy carrier dog follower spring to ensure positive feed. I installed a Wilson Combat Over size safety because if your using this you most likely have gloves on. The bolt is upgraded with a solid stell extractor. I install a competition sear to give you a 3 pound trigger pull. 23" fully rifled barrel is parkerized black and has a cantilever mount. A Wilson combat one round extension is installed to allow you to still get four 3" magnum slugs in the tube or for five 2 3/4 shells. This also has the heavy mag spring and combat follower to ensure positive feed. The stock is a Remington synthetic Monte Carlo with a quick detach stud installed in the stock. Your front sling mount is a slotted plate. You can select a vertical front plate with slot or vertical plate with Quick detach stud. This weapon is $630 puls shipping.





change synthetic Monte Carlo stock to Remington Laminmated Monte Carlo set Add $ 25
Change barrel to Remington 20 fully rifled with rifle sights Subtract $ 45
Change stock to Knoxx SpecOps Add $ 75
Add Knoxx Power pack ( to SpecOps stock only ) Add $45
Change to Wislon Combat 2 shot extension No charge
Change to Remington LE 3 shot extension Add $25
Add Mesa Tactical 6 round shell holder ( must change forend to LE ) Add $65
Remove extension and install heavy police mag spring ( makes this a 4+1) Subtract $10