AI&P TACTICAL, LLC
CUSTOM TACTICAL SHOTGUNS
72 E Chauvez Rd
Scottville, Michigan 49454
Tel: 231-690-0954 E-mail: aippi@netscape.com
J.D. McGuire, Owner
I am not set up to take credit cards and I will never do pay pal. As this grows, I will be able to get set up for credit cards and of course the prices will go up. Till then. A money order or certified funds will have to do. Simply e-mail me and tell me the item you want. Send the funds and I will ship your item. Shipping is by USPS 2-3 day priority. If you are uncomfortable doing this then go to www.gunbroker.com or to www.isoldmygun.com and see if I have the item listed there, however, it will be a few dollars more on an auction site as I have to pay an auction fee when you buy it. You can find me on Gun Broker under the use name aippi and notice the over 960 A+ ratings and never a rating under A+.
The barrels I list as police barrels are all 18.5" and are Factory parkerized. There is an 18.5 with a fixed Cyl Bore Choke that is in a matte finish. These are called Police barrels as at 18.5" they end flush with the Remington LE tube extension where the 18" barrel will end about a 1/2 inch back. All barrels are for 12 ga 870 and are chambered for 3" shells. I also have some hunting barrels and these prices will go up in September as demand does and will most likely will not have them after these are gone. The Remington LE tube extension kits come off of the factory new 870HD's we buy, some clients want other tubes so I have dozens of the LE's. We bead blast them and parkerize them black or you can get the factory matte finish. You can get the tube in blue but the mag bracket and mag tube coupling will be matte.
The barrels and tubes that I parkerize are done with heavy Zinc the same as the weapons I build and are pre-blackened with Brownell pre-black treatment. I build duty and weapons for heavy use and this is the best finish for this.
I know you see the Sure Fire lights on my weapons. I am a Sure Fire Original Equipment Manufacturer ( OEM ) dealer which means I signed an agreement to only sell the lights when they are on my custom weapons or your weapon If I rebuild it and I will not violate this agreement so I will not sell the individual lights. If you want a Sure Fire forend go to www.surefire.com and buy one from their retail site.
Note: If you want a barrel for a Remington870 Express or Home Defense I recommend the 18.5 Cyl Bore as it is a matte finish and will match your weapon.
I am an Authorized Remington Parts Dealer and can get any Remington Item so if you don't see it here just ask.
870 12ga Barrels - (See the "about Shipping" link)
* 18.5 police, fixed Cyl Bore, bead sight,Parkerized $140
18.5 Police, fixed Cyl Bore, bead sight matte finish $120
18.5 Police, fixed I/C, bead sight. Parkerized $ 98
18.5 Police, rifle sights, fixed I/C Parkerized $138
18.5 Police, rifle sights, fixed Cyl Bore, Parkerized $148
18.5 Police, rifle sights, fixed Modified, Parkerized $148
18.5 Police, matte finish, BS , RC/one modified tube $148
18.5 Police, Parkerized Tritium bead Modified $148
18.5 Police, blued, Bead sight fixed I/C $148
18.5. Police, Parkerized font Wilson Ghost Ring sight $148
18.5 Police, Blued, bead sight fixed I/C $148
20" Police, parkerized, bead sight $148
20" police, blued, bead sight $118
18.5" bead sight, matte with RC and Tactical Rem Choke $198
18.5" bead sight, PC coat with RC and Tactical Rem Choke $198
*18.5" bead sight, Parkerized with Tactical Rem Choke $225
*20"Fully Rifled,Rifled sights, Parkerized $ 178
*20" fully rifled, rifle sights Rem Choke Parkerized $218
870 20 ga Barrels
20 gauge, 18.5" I/C choke $132
20 gauge, fully rifeld with rifles sights $170
11-87 12 ga Barrels
18.5" parkerized bead sight $136
18.5" parkerized Rifle sights $168
* Remington does not offer these barrel in a parkerized finish so we take a new matte finish barrel, blast in down, parkerize it then hone and polish the chamber and bore.
I will install Meprolight tritium rifle night sights ( made by Kimber ) to any of the rifle sight barrels on this page for $90 or $100 for Trijicon rifle night sights.
Chokes - shipping $5
fully rifled Rem Choke $20
Tactical Rem Choke $52
Stocks - (See about Shipping)
( all these sets come with forend, and hardware and are for 12ga 870 only or will fit 870 20 ga heavy receiver that have a serial number that ends in the letter " N' or "X" )
Remington Factory Synthetic stock set with LE forend $45
Remington Factory Synthetic set with Supercell pad NA
Remington LE Reduced 13" LOP with R3 pad & LE forend $90
Speed Feed II w/ LE Forend $NA
Speed Feed I w/ built in shell holders $75
Speed Feed III w/ built in shell holders $85
Speed Feed IV $75
Speed Feed IV-S $80
Speed Feed IV-S with R3 (by Limb Saver ) $110
Knoxx SpecOps with Knoxx Forend $115
Power Pack for SpecOps $45
Mesa Tactical LEO with Endine Buffer $298
M4 recoil pad fro Mesa stock $15
Tube extension - shipping $8 ( buy any 18.5 barrel and save on shipping as both ship for the barrel shipping price )
Remington LE 2 shot kit, Parkerized $75
Remington LE 2 shot kit, Matte $65
Remington LE 2 shot kit, matte for 20 ga $75
Mesa Tactical Shell Holder - Shipping $8
6 round $ 60 8Round $ 80
6 round with pictinney rail $105
Tune Up Kit
If your 870 is having a feed problem it is most likely a simple fix., just replace the mag tube spring. Here is a great tune up kit. Every thing is new- you get - 4 round mag tube spring, retainer, follower, Carrier follower dog spring ,extractor and standard sear spring.. Watch the "How To Videos" on this web sight to install the parts or I will tell you how to change out the all the parts and talk you through it while you do it,, it is very easy. Your 870 will function great. Also, if you have the J lock on your weapon and want a standard safety to replace it, I will add one to this kit for no additional cost and talk you through changing it, yu can use the exsiting detent plunger and spring but should also order a new detent ball and sping. Kit is $16.00 with $ 6 shipping. Add a new Express Mag cap for only $8. These are standard 870 parts.